Input files

Setting file

A setting file contains phonopy settings which are summarized at Setting tags. This file is passed to phonopy as an argument, e.g.,

% phonopy phonopy.conf

where the filename is arbitrary.

Structure file (POSCAR)

Crystal structure is written in VASP’s manner (for Wien2k interface, see WIEN2k mode). The format is simple. The first line is for your comment, where you can write anything you want. The second line is the ratio for lattice parameters. You can multiply by this number. The third to fifth lines give the lattice parameters, a, b, and c for the respective lines. The sixth line contains the number of atoms for each atomic species, which have to correspond to the atomic positions in the order. The seventh line should be written as Direct. This means that the atomic positions are represented in fractional (reduced) coordinates. When you write chemical symbols in the first line, they are read and those defined by the ATOM_NAME tag are overwritten.

Example of rutile-type silicon oxide crystal structure (1)

Si O
   1.00000000000000
     4.2266540199664249    0.0000000000000000    0.0000000000000000
     0.0000000000000000    4.2266540199664249    0.0000000000000000
     0.0000000000000000    0.0000000000000000    2.6888359272289208
 2   4
Direct
  0.0000000000000000  0.0000000000000000  0.0000000000000000
  0.5000000000000000  0.5000000000000000  0.5000000000000000
  0.3067891334429594  0.3067891334429594  0.0000000000000000
  0.6932108665570406  0.6932108665570406  0.0000000000000000
  0.1932108665570406  0.8067891334429594  0.5000000000000000
  0.8067891334429594  0.1932108665570406  0.5000000000000000

The VASP 5.x style is also supported. Chemical symbols are inserted just before the line of the numbers of atoms. The chemical symbols in this line overwrite those defined by the ATOM_NAME tag and those defined by the first line of POSCAR.

Example of rutile-type silicon oxide crystal structure (2)

Stishovite
   1.00000000000000
     4.2266540199664249    0.0000000000000000    0.0000000000000000
     0.0000000000000000    4.2266540199664249    0.0000000000000000
     0.0000000000000000    0.0000000000000000    2.6888359272289208
Si   O
 2   4
Direct
  0.0000000000000000  0.0000000000000000  0.0000000000000000
  0.5000000000000000  0.5000000000000000  0.5000000000000000
  0.3067891334429594  0.3067891334429594  0.0000000000000000
  0.6932108665570406  0.6932108665570406  0.0000000000000000
  0.1932108665570406  0.8067891334429594  0.5000000000000000
  0.8067891334429594  0.1932108665570406  0.5000000000000000

Force file (FORCE_SETS)

This file gives sets of forces in supercells with finite atomic displacements. Each supercell involves one displaced atom. The first line is the number of atoms in supercell. The second line gives number of calculated supercells with displacements. Below the lines, sets of forces with displacements are written. In each set, firstly the atom number in supercell is written. Secondary, the atomic displacement in Cartesian coordinates is written. Below the displacement line, atomic forces in Cartesian coordinates are successively written. This is repeated for the set of displacements. Blank likes are simply ignored.

In the following example, the third line is the displaced atom number that corresponds to the atom number in the supercell created by phonopy. The fourth line gives the displacements in Cartesian coordinates. The lines below, the atomic forces in Cartesian coordinates are written. Once all the forces for a supercell are written, the next set of forces are written. This routine is repeated until the forces of all the displacements have been written.

See also VASP interface and WIEN2k interface for VASP and Wien2k users.

Example

48
2

1
  0.0050650623043761   0.0000000000000000   0.0086223630086415
  -0.0347116200   -0.0000026500   -0.0679795200
   0.0050392400   -0.0015711700   -0.0079514600
   0.0027380900   -0.0017851900   -0.0069206400
... (continue until all the forces for this displacement have written)

25
  0.0050650623043761   0.0000000000000000   0.0086223630086415
  -0.0017134500   -0.0001539800    0.0017333400
   0.0013248100    0.0001984300   -0.0001203700
  -0.0001310200   -0.0007955600    0.0003889300
... (continue until all the forces for this displacement have written)

FORCE_CONSTANTS

If the force constants of a supercell are known, it is not necessary to prepared FORCES. Phonopy has an interface to read and write FORCE_CONSTANTS. To read and write FORCE_CONSTANTS are controlled by Force constants.

VASP users can use VASP DFPT interface to create FORCE_CONSTANTS from vasprun.xml.

Format

First line is for the number of atoms in supercell. Below second line, force constants between atoms are written by every four lines. In first line of the four lines, anything can be written, i.e., just ignored. Second to fourth lines of the four lines are for the second rank tensor of force constant in Cartesian coordinates, i.e.::

xx xy xz
yx yy yz
zx zy zz

Example

32
1   1
  4.635786969900131    -0.000000000000000    -0.000000000000000
 -0.000000000000000     4.635786969900130    -0.000000000000000
 -0.000000000000000    -0.000000000000000     4.635786969900130
1   2
 -0.246720998398056    -0.000000000000000    -0.000000000000000
 -0.000000000000000     0.018256999881458    -0.000000000000000
 -0.000000000000000    -0.000000000000000     0.018256999881458
...
1  32
  0.002646999982813     0.018011999883049    -0.000000000000000
  0.018011999883049     0.002646999982813    -0.000000000000000
 -0.000000000000000    -0.000000000000000     0.035303999770773
2   1
 -0.246720998398056     0.000000000000000     0.000000000000000
  0.000000000000000     0.018256999881458     0.000000000000000
  0.000000000000000     0.000000000000000     0.018256999881458
...
32  32
  4.635786969900131     0.000000000000000     0.000000000000000
  0.000000000000000     4.635786969900130     0.000000000000000
  0.000000000000000     0.000000000000000     4.635786969900130

force_constants.hdf5

This is an alternative of FORCE_CONSTANTS but the data is stored in HDF5 format. See the detail of how to obtain this file, –hdf5.

QPOINTS (optional)

Specific q-points are calculated using QPOINTS = .TRUE. tag and QPOINTS file. The file format of QPOINTS is as follows. The first line gives the number of q-points. Then the successive lines give q-points in reduced coordinate of reciprocal space of the input unit cell.

Example

512
-0.437500000000000  -0.437500000000000  -0.437500000000000
-0.312500000000000  -0.437500000000000  -0.437500000000000
-0.187500000000000  -0.437500000000000  -0.437500000000000
...

BORN (optional)

This file is used with the --nac option or NAC tag.

The formula implemented is refered to Non-analytical term correction.

Format

In the first line, unit conversion factor is given. In versions 1.10.4 or later, the default value for each calculater can be used if characters than numerical number are given. The default values for the calculaters are found at Default unit conversion factor for non-analytical term correction.

In the second line, dielectric constant \epsilon is specifed in Cartesian coordinates. The nine values correspond to the tensor elements of xx, xy, xz, yx, yy, yz, zx, zy, and zz.

From the third line, Born effective charges Z for the independent atoms in the primitive cell have to be written in Cartesian coordinates. The independent atoms can be found using the -v option. As shown below in the Al2O3 example, the independent atoms are marked by * in front of atomic positions:

% phonopy --dim="2 2 1" --pa="2/3 -1/3 -1/3  1/3 1/3 -2/3  1/3 1/3 1/3" -v
        _
  _ __ | |__   ___  _ __   ___   _ __  _   _
 | '_ \| '_ \ / _ \| '_ \ / _ \ | '_ \| | | |
 | |_) | | | | (_) | | | | (_) || |_) | |_| |
 | .__/|_| |_|\___/|_| |_|\___(_) .__/ \__, |
 |_|                            |_|    |___/

                                     1.8.4.2

Settings:
  Supercell:  [2 2 1]
  Primitive axis:
     [ 0.66666667 -0.33333333 -0.33333333]
     [ 0.33333333  0.33333333 -0.66666667]
     [ 0.33333333  0.33333333  0.33333333]
Spacegroup:  R-3c (167)
---------------------------- primitive cell -------------------------------
Lattice vectors:
  a    2.403817201137804    1.387844508159565    4.372423306604251
  b   -2.403817201137804    1.387844508159565    4.372423306604251
  c    0.000000000000000   -2.775689016319131    4.372423306604251
Atomic positions (fractional):
   *1 Al  0.35218509422890  0.35218509422890  0.35218509422890  26.982
    2 Al  0.64781490577110  0.64781490577110  0.64781490577110  26.982
    3 Al  0.14781490577110  0.14781490577110  0.14781490577110  26.982
    4 Al  0.85218509422890  0.85218509422890  0.85218509422890  26.982
   *5 O   0.55616739064549  0.94383260935451  0.25000000000000  15.999
    6 O   0.44383260935451  0.05616739064549  0.75000000000000  15.999
    7 O   0.25000000000000  0.55616739064549  0.94383260935451  15.999
    8 O   0.75000000000000  0.44383260935451  0.05616739064549  15.999
    9 O   0.94383260935451  0.25000000000000  0.55616739064549  15.999
   10 O   0.05616739064549  0.75000000000000  0.44383260935451  15.999
------------------------------ unit cell ----------------------------------
Lattice vectors:
  a    4.807634402275609    0.000000000000000    0.000000000000000
  b   -2.403817201137805    4.163533524478696    0.000000000000000
  c    0.000000000000000    0.000000000000000   13.117269919812754
Atomic positions (fractional):
   *1 Al  0.00000000000000  0.00000000000000  0.35218509422890  26.982 > 1
    2 Al  0.66666666666666  0.33333333333334  0.68551842756224  26.982 > 1
    3 Al  0.33333333333334  0.66666666666666  0.01885176089557  26.982 > 1
    4 Al  0.00000000000000  0.00000000000000  0.64781490577110  26.982 > 2
    5 Al  0.66666666666666  0.33333333333334  0.98114823910443  26.982 > 2
    6 Al  0.33333333333334  0.66666666666666  0.31448157243776  26.982 > 2
    7 Al  0.00000000000000  0.00000000000000  0.14781490577110  26.982 > 3
    8 Al  0.66666666666666  0.33333333333334  0.48114823910443  26.982 > 3
    9 Al  0.33333333333334  0.66666666666666  0.81448157243776  26.982 > 3
   10 Al  0.00000000000000  0.00000000000000  0.85218509422890  26.982 > 4
   11 Al  0.66666666666666  0.33333333333334  0.18551842756224  26.982 > 4
   12 Al  0.33333333333334  0.66666666666666  0.51885176089557  26.982 > 4
  *13 O   0.30616739064549  0.00000000000000  0.25000000000000  15.999 > 5
   14 O   0.97283405731215  0.33333333333334  0.58333333333334  15.999 > 5
   15 O   0.63950072397883  0.66666666666666  0.91666666666666  15.999 > 5
   16 O   0.69383260935451  0.00000000000000  0.75000000000000  15.999 > 6
   17 O   0.36049927602117  0.33333333333334  0.08333333333334  15.999 > 6
   18 O   0.02716594268785  0.66666666666666  0.41666666666666  15.999 > 6
   19 O   0.00000000000000  0.30616739064549  0.25000000000000  15.999 > 7
   20 O   0.66666666666666  0.63950072397883  0.58333333333334  15.999 > 7
   21 O   0.33333333333334  0.97283405731215  0.91666666666666  15.999 > 7
   22 O   0.00000000000000  0.69383260935451  0.75000000000000  15.999 > 8
   23 O   0.66666666666666  0.02716594268785  0.08333333333334  15.999 > 8
   24 O   0.33333333333334  0.36049927602117  0.41666666666666  15.999 > 8
   25 O   0.69383260935451  0.69383260935451  0.25000000000000  15.999 > 9
   26 O   0.36049927602117  0.02716594268785  0.58333333333334  15.999 > 9
   27 O   0.02716594268785  0.36049927602117  0.91666666666666  15.999 > 9
   28 O   0.30616739064549  0.30616739064549  0.75000000000000  15.999 > 10
   29 O   0.97283405731215  0.63950072397883  0.08333333333334  15.999 > 10
   30 O   0.63950072397883  0.97283405731215  0.41666666666666  15.999 > 10
------------------------------ supercell ----------------------------------
...

If VASP is used as the calculator for Born effective charge, and the hexagonal unit cell is used for the calculation, the Born effective charge tensors of atoms No. 1 and 13 have to be written in BORN file.

Example

 14.400
 3.269  0.000  0.000  0.000  3.269  0.000  0.000  0.000  3.234
 2.981  0.000  0.000  0.000  2.981  0.000  0.000  0.000  2.952
-1.935  0.000  0.000  0.000 -2.036 -0.261  0.000 -0.261 -1.968

or using the default NAC unit conversion factor (version 1.10.4 or later),

default value
 3.269  0.000  0.000  0.000  3.269  0.000  0.000  0.000  3.234
 2.981  0.000  0.000  0.000  2.981  0.000  0.000  0.000  2.952
-1.935  0.000  0.000  0.000 -2.036 -0.261  0.000 -0.261 -1.968